Total: ₹637,500.00
Sale!
Tool Room Lathe Machine
₹350,000.00 ₹280,000.00
Special Features
- Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge with 4 “V” type bed.
- Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel with front DOUBLE BEARING.
- Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
- DOUBLE SCREW NORTON GEAR BOX :- Provided as time Server equipment with Separate Thread & Feed Shaft.Thus,feed & Thread gears could be changed reqpidlly and decreases the water and tear in Half nut & Lead Screw
- Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal griding.
- Instruction Manual as per indian Standard IS – 1878 (part -I)
- COLOUR OPTION :- Emerald Green / Blue & White (Two Tone)
3 in stock
Compare
| Weight | 1800 kg |
|---|---|
| Dimensions | 108 × 48 × 50 cm |
Technical Specification
| MODEL | MIHIR-300 x 1000 | MIHIR-300 x 1500 | MIHIR-300 x 2400 | |
| BED : | Bed Length | 2100 (7″)MM | 2700 (9″)MM | 3600 (12′)MM |
| Bed Width | 375 (15″)MM | 375 (15″)MM | 375 (15″)MM | |
| Bed Type | 4 V Type(2 Legs) | 4 V Type(3 Legs) | 4 V Type(4 Legs) | |
| Gap Length | 160 MM | 160 MM | 160 MM | |
| Gap Length in front of face plate | 175 MM | 175 MM | 175 MM | |
| CAPACITY: | Height of Centre | 300(12″) | 300(12″) | 300(12″) |
| Swing Over Bed | 585 MM | 585 MM | 585 MM | |
| Swing Over Cross slide | 390 MM | 390 MM | 390 MM | |
| Swinging Gap | 890 MM | 890 MM | 890 MM | |
| Admit Between Centre | 1000 MM | 1500 MM | 2400 MM | |
| Movement of Cross Slide | 215 MM | 215 MM | 215 MM | |
| Movement of Compound Slide | 152 MM | 152 MM | 152 MM | |
| MAIN SPINDLE: | Spindle Nose(Threaded Type) | 6 TPI | 6 TPI | 6 TPI |
| Taper Bore in Spindle Sleeve | MT – 4 | MT – 4 | MT – 4 | |
| Spindle Bore | Ø 75(3″) | Ø 75(3″) | Ø 75(3″) | |
| TAIL STOCK : | Quil Dia | Ø 70 MM | Ø 70 MM | Ø 70 MM |
| Taper in Quill | MT – 5 | MT – 5 | MT – 5 | |
| Quill Travel | 200 MM | 200 MM | 200 MM | |
| SPEED : | No. of Spindle Speed | 8 | 8 | 8 |
| RPM (Low / High) 1440 RPM Motor | 75 – 625 | 75 – 625 | 75 – 625 | |
| RPM (Low / High) 720 RPM Motor | 35 – 300 | 35 – 300 | 35 – 300 | |
| THREADS: | Metric Thread | 24 (0.5 To 15 MM) | 24 (0.5 To 15 MM) | 24 (0.5 To 15 MM) |
| English Thread | 43 (2 To 60 TPI) | 43 (2 To 60 TPI) | 43 (2 To 60 TPI) | |
| Lead Screw | Ø 38 MM | Ø 38 MM | Ø 38 MM | |
| Electricals: | Motor Power | 3 HP / 5 HP | 3 HP / 5 HP | 3 HP / 5 HP |
| Drive: | Teethed ‘V’ Belt | C – 95 | C – 95 | C – 95 |
| General: | Weight (Approx.) | 1300 Kg | 1500 Kg | 1800 Kg |
Standard Accessories
- Change Gear Set
- (Inch & mm)
- Chuck Plate
- Tool Post Key
- Center Adaptor
- Dead Centre (2 Nos.)
- Motor Pully
- Four Position Tool Post
Extra Accessories
- Dog or True Chuck
- Electric Motor & V-Belt with Electricals
- Coolant Pump,Tank and Nozzle
- Quick Change Tool Post / Rear Tool Post
- Reverse – Forward Switch
- Steady Rest
- Follow Rest
- Face Plate
- Splesh Guard
- Machine Lamp
Special Requirement
- Flat Belt Pulleys
- Taper Turning Attachment
- Revolving Center
- Milling Attachment
- Digital Read Out Z.
- Any Special Requirement as Per Customer’s Drawing
Related Products
